Follow-the-movement receiving device
Servo-following splicing device: according to the input pipe specification, the system adjusts the supporting action during cutting by itself, which minimizes the influence of pipe error caused by pipe length sagging and ensures cutting accuracy.
CNC clamping system
With the logical action set by the system, it is possible to achieve pull-type cutting of tubes, which significantly improves the cutting accuracy and can conditionally achieve zero tail material cutting (depending on the workpiece cutting size and specific cutting process).
Three chucks
Three chucks mutual shift for fine cutting. Independently researched and developed full-stroke chuck to realize cutting and blanking of any length of pipe, using the entire pipe as much as possible to achieve “zero remains” cutting.
Product parameter form
Item
Parameter
Unit
Maximum cut pipe length
0~6400 (more than 3 meters need to extend the front joint material)
mm
Cut pipe diameter
16~220 (external circle of workpiece)
mm
Minimum tail material
90
mm
X、Y-axis positioning accuracy
±0.05/1000mm
mm
X、Y axis repeat positioning accuracy
±0.03/1000mm
mm
Acceleration speed
1.5G
m/s²
Max. running speed
100
m/min
Max. speed of chuck
150
rpm
Chuck load weight
Front and rear chucks 120Kg each
kg
Weight of loading machine
5000
Kg
Main machine shape (length, width and height)
Approx. 10700×3700×2410
mm
Laser power
1
kw
Control system
Bertrud 5000B
mm
Power of the whole machine
24
kw
Power supply requirements
380v/50Hz
Product parameter form
