Is there any danger in the operation of a pipe laser cutting machine?

Strictly speaking, tube laser cutting machine is a relatively environmentally friendly cutting method, basically no harm to the body. Is there any other danger in the operation of a pipe laser cutting machine?

These premises is to be able to correctly and safely operate the machine, otherwise it will also cause personal injury and machine damage.

Easy fuel. Some materials are not allowed to be cut on the pipe laser cutting machine, including high reflective materials, PVC materials, etc.

Don't stare at the laser processing operation. It is forbidden to observe the laser through binoculars, microscopes, and mafnifiers. Although the sparks are good-looking, the damage to the eyes can not be ignored.

During thw working process of the machine, the staff should follow the whole process and do not leave without authorization to avoid unnecessary loss and danger.

If the laser irradiates the skin, if the power is too high, it may cause skin damage. Of course, the damage can be repaired by tissue, but long-term irradiation may cause scald and scar.

When the tube laser cutting machine is processing some special metal marerials, the smoke generated contains a lot of chemical components, and the dust will be suspended in the air, which will cause harm to the human body after inhalation.

Before the operation of the tube laser cutting machine, the safety manual should be memorized to avoid irreparable/damage to itself or others.